AA05700 NXT H08(H12) 0.7 Placement Nozzle
Part No.: AA05700
Item Name: NXT H08(H12) 0.7 Placement Nozzle (Spec marked as 0.7×0.5mm commonly)
Brand: FUJI
Applicable Models: H08 heads, H12 heads and compatible V12 modules of FUJI NXT series mounters (NXT I / II / III)
Function: Adopt vacuum suction to accurately pick and place tiny components such as 0402, 0603 resistors, capacitors and miniature ICs. The 0.7mm nozzle diameter matches corresponding package sizes to guarantee stable placement precision and pickup rate.
- AA05700 NXT H08(H12) 0.7 Placement Nozzle
Fuji AA05700 is a 0.7 placement nozzle compatible with NXT H08, H12 and V12 modules, with a specification of 0.7×0.5mm for Fuji NXT I/II/III series mounters. This precision small-hole nozzle is specially designed for 0402, 0603 tiny resistors, capacitors and miniature ICs. It provides steady vacuum suction and high pickup rate to prevent placement offset.
Long-term operation causes abrasion and air leakage, so regular replacement is required to reduce component dropping defects. Both original and wear-resistant compatible versions are available. As a common SMT consumable for high-speed precision mounting, it stabilizes production yield and cuts downtime maintenance, essential for mass production of micro components in electronics factories.
For inquiries, please contact us at +8613537875415 or Lizzy@smtlinemachine.com.
Visit us at Xintian Industrial Area, Baoan, Shenzhen City, China.liang
FAQ
Q1: Which equipment is the AA07C00 placement nozzle compatible with?
Compatible with Fuji NXT H08 and H12 placement heads, for mounting 0.7-spec micro components.
Q2: What is the core function of this 0.7 nozzle?
Precision tiny hole structure with even and stable vacuum, accurately pick micro SMD components such as 0201, reduce loss rate during high-speed placement.
Q3: Can it directly replace the original nozzle of the same model from the manufacturer?
Fully matched with original nozzle in shape, buckle positioning and vacuum channel size, plug and play without calibration after replacement.
Q4: What production line problems will be caused by clogged or worn nozzles?
Insufficient suction leads to missed pickup, placement offset and frequent component dropping; clogged micro holes trigger vacuum alarm and line downtime.
Q5: How to carry out daily maintenance to extend the service life of the nozzle?
Clean dust and tin residue in micro holes every shift, regularly inspect wear and deformation of nozzle tip, unclog blockages with dedicated cleaning liquid.