2AGKNX003500 NXT H24 Head 1.0mm Placement Nozzle
Part No.: 2AGKNX003500 (common original factory part number); some suppliers mark it as R047-010-035.
Item Name: NXT H24 Head 1.0mm Placement Nozzle
Brand: Fuji
Applicable Models: Fuji NXT series mounters (including NXT III and NXT H24 / H24G modules)
Function: Matched with high-speed H24 placement heads, it accurately picks and places standard 1.0mm chip components such as 0603 and 0402 parts via vacuum suction, guaranteeing stable placement precision and mounting speed.
- 2AGKNX003500 NXT H24 Head 1.0mm Placement Nozzle
2AGKNX003500 is a dedicated 1.0mm placement nozzle for Fuji NXT H24 and H24G working heads, marked as R047-010-035 in the material codes of some suppliers, and compatible with Fuji NXT III modular mounters. Equipped with a 1.0mm bore, this nozzle is engineered to pick standard 0402 and 0603 chip resistors and capacitors. Matched with high-speed H24 placement heads and the vacuum system, it delivers both fast mounting speed and accurate positioning simultaneously.
Our company holds sufficient stock with fast delivery lead times. This product is available in two versions: original Fuji Electric nozzles and third-party compatible replacements, acting as a universal core consumable for high-speed SMT production lines. Wear and tear from long-term operation will result in component dropping and alignment deviation. Regular replacement stabilizes line efficiency and finished product yield, and the nozzle is widely adopted for mass mounting processing of all types of circuit boards.
For inquiries, please contact us at +8613537875415 or Lizzy@smtlinemachine.com.
Visit us at Xintian Industrial Area, Baoan, Shenzhen City, China.liang
FAQ
Q1: Which equipment is the 2AGKNX003500 placement nozzle compatible with?
Compatible with Fuji NXT H24 high-speed placement head, used for mounting SMD components of 1.0 specification.
Q2: What is the core function of this 1.0mm nozzle?
Stably pick regular medium and small components such as 0805 and 1206 with balanced vacuum pressure to reduce component loss in high-speed production.
Q3: Can it directly replace the original nozzle of the same model from the manufacturer?
Fully interchangeable with original nozzle in shape, vacuum holes and buckle positioning size; plug and play without calibration after installation.
Q4: What production line problems will be caused by clogged or worn nozzles?
Reduced vacuum suction causes missed pickup, placement offset and frequent component dropping, and vacuum alarms lead to production line downtime.
Q5: How to carry out daily maintenance to extend the service life of the nozzle?
Clean tin powder and dust in tiny nozzle holes every shift, regularly check wear and deformation of nozzle tip, and clear blockages with special cleaning liquid.