Best Automatic Moving Cutter Machine Supplier in China
CNSMT’s Automatic Moving Cutter Machine is an efficient and accurate electronic manufacturing device designed to cut large printed circuit boards to the required size and shape, with high precision, automation and low stress cutting features.
It not only improves production efficiency, but also ensures the high quality and consistency of products, and has become an important choice for electronic manufacturing enterprises to improve production efficiency and product quality.
- High precision cutting
- Automated operation
- Low stress cutting
- Efficient production
- Easy maintenance
- Automatic Blade Cutting Machine specification
- Feather
- Download
| Automatic Blade Cutting Machine specification | |
| Splitter length | 300mm |
| Board width | 58mm-350mm |
| Height limit for underside components | 15mm(standard machine) |
| Equipment width | 1100mm |
| Equipment height | 630mm |
| Length of equipment (front and rear) | 730mm |
| Precision cutter | |
| apply | 3.0mm below plastic board, fiberboard, composite board |
| Service life | L250*W150 |
| Plastic board | 500000 ~ 800000 |
| fiberboard | 700000 ~ 1000000 |
| Composite board | Over 1,000,000 |
| Temperature range | Below 300℃ |
Automatic Moving Cutter Machine peculiarity:
Automatic Moving Cutter
Application Range:
suitable to shear PCB of width 58-360mm, component height not exceeds 20mm, PCB material of glass fibre, FR-4 , etc
Virtue:
traditional type needs to place PCB manually, it costs too much time and energy to locate PCB, in this way, productivity is really limited. While, ASC-505 is upgraded much accordingly, it is controlled by microcomputer, and able to set the length of single shear, manual location is not needed. Besides, ASC-505 can communicate with magazine loader, which saves labor cost, raises efficiency and enjoys higher automatization.
Features:
- After solder, components of the PCB might be damaged due to internal strength when break by hand. While ASC-505 works by moveable cutter blade , internal strength is reduced thoroughly and controlled in range 500-600Ue, which to avoid Solder crack and component broken. Productivity and quality are raised accordingly.
- During shear, PCB keeps stable, make sure components won`t be damaged due to unnecessary movement.
- It applies microcomputer to automatically control the times and length of the cutting, PCB width 58 to 300mm, and able to store data of 100 groups. It operates by PLC screen.
- Distance between upper round blade and down strip blade can be adjusted precisely, of range 0 to 15mm
- Strip blade can move up and down, which solved the problem to separate PCBA of double surfaces.
- Thoroughly reduce internal strength,which to avoid bad situation as solder crack, etc
- Shear speed is 1 time per second, control by system.
- High tech Feeding facility, manual operation is not needed, backup Port for additional iron-hand.
- Pressure of 4-5PA, no need certain place for the machine, maintenance on shell can be done by anti-rust Oil.
- Automatic counting, obvious display on yield.
- It applies omron light curtain as safety, machine stops immediately in case hand or foreign substance is detected in shear area.
- Step motor drive, unlock once machine is turned on, with accurate location, and solved the problem that cutting length is changed by DC AC motor after some time`s work due to inertia.
- This model is the type that prolongs feeding route, PCB parts could be transferred to working line for inspection after shear.
Scope of application:
3.0mm below plastic board, fiberboard, composite board. Suitable for all kinds of V-slot PCB, SMT circuit board, aluminum substrate, LED circuit board,LED light strip cutting, good effect, fast speed, no damage to the components on the circuit board. Imported high-speed steel blade, long life, mainly should used in LED industry, SMT industry, mobile phone /mp3 industry, electric toy industry, all kinds of electronic industry, the use of circuit boards in various industries.