Best PCB Depaneling Machine Supplier in China

CSO-300 Offline Automatic PCB Depaneling Machine information

◇CCD scanning function

① Industry-leading PCBA whole-board scanning function, changing the traditional visual guidance;

② Shorten the programming time, the path is displayed in real time, the modification operation is fast.

◇ Milling cutter intelligent mode

① Adjust the cutting depth according to the PCB board thickness, improve the utilization rate and save costs;

② Define milling cutter use standards according to product needs;

③ The replacement of the milling cutter does not need to redo or modify the program, and can be easily achieved after clicking the switch operation.

◇ Automatic cutting

① The cutting procedure is combined with the production model and quantity, and the production is planned according to PMC;

② Avoid premature production and unclear production capacity;

③ Realize the separation of man and machine.

◇Operation error, full monitoring

① Cutting process, marking point error real-time record;

②Real-time recording of motion axis error;

③The error value can be set according to the needs of the product.

◇ Industry 4.0-MES system

①Automatic uploading and retrieving of server data:

② Upload machine data and production data;

③ Real-time monitoring of equipment conditions.

FAQ

Q: What is the essential difference between the offline automatic PCB panel saw and the traditional manual panel saw?

A: The SL-300 achieves fully automatic cutting through a high-precision servo system and visual positioning, avoiding PCB micro-cracks and component damage caused by manual operation. Measured comparison data shows:

1. The yield of board separation has been increased by more than 25% (reaching 99.6%).
2. The residual stress of V-CUT is reduced by 70%.
3. Production efficiency is increased by 3 to 5 times (supporting 24-hour continuous operation).

Q: What are the specific indicators for cutting accuracy and speed?

A:

1. Positioning accuracy: ±0.02mm (laser calibration)
2. Cutting speed: 50 – 300 mm/s (automatically optimized according to the thickness of the material)
3. Applicable board thickness: 0.4 – 4.0mm (FR4/aluminum substrate/ceramic substrate)

Q: What are the key steps required for daily maintenance?

A:

1. Daily: Clean up the cuttings and debris, inspect the vacuum cleaner filter.
2. Weekly: Lubricate the XYZ axis guide rails, calibrate the pressure sensor
3. Quarterly: Replace the milling cutter bearings, clean the optical lenses

Q: What safety protection mechanisms does the equipment have?

A:

1. Infrared human body sensing: The machine automatically stops when the operator enters the dangerous area.
2. Overload protection: Trigger emergency rollback when the cutting resistance exceeds the limit.
3. Dual redundant gas path: Maintains fixture locking in case of sudden gas interruption

If you are interested in our products, please contact us！