Best wave soldering Supplier in China
MCF-350L adopts computer +PLC dual control system to support digital setting and real-time monitoring of soldering parameters to ensure accurate and stable process.
MCF-350L Through the touch screen interface, key parameters such as transport speed, crest height and preheating temperature can be flexibly adjusted to meet diverse production needs.
- High efficiency weldability
- Heavy-duty transportation system
- Energy-saving preheating system
- Low-oxidation maintenance-free tin furnace
- Modular structure
- Specification
- Feather
- Download
| Weight | Approx:2000kg |
| Starting power | 25KW |
| Operating power | 5KW |
| Control method | Computer + PLC control |
| Power supply | AC380V 50Hz |
| Spray system | Spray system |
| Drive mode | Stepping motor |
| Spray pressure | 0.3-0.5MPa |
| Nozzle cleaning | Auto Wash |
| Flux flow control | 0-100ml adjustable |
| Flux addition | Auto |
| Exhaust pipe | 200mm in diameter |
| Ventilation method | Up Exhaust |
| Preheating system | Preheating system |
| Preheating method | Hot air or IR tube |
| Number of preheating zones | 3 |
| Preheating zone length | 1800mm |
| Pre-heat temperature | Room tempearture~250℃ |
| Preheating time | Approx.15min |
| Transportation system | Transportation system |
| Pcb width | 50-350mm |
| Pcb transport direction | left to right (right to left is possible) |
| Transport speed | 0-2000mm/min |
| Transport height | 750±20mm |
| Pcb component height | Top 120mm Bottom 15mm |
| Speed control | Frequency Variable frequency speed control |
| Titanium claw | Quick-Change Finger /heavy claw |
| Rail angle | 3°-7° |
| Tin furnace system | Tin furnace system |
| Wave mode | Motor Drive |
| Tin furnace material | 316#SUS/titanium alloy/ductile iron |
| Tin furnace heating method | External heating |
| Tin furnace power | 13.5kw |
| Stove temperature | Maximum 350℃ |
| Tin furnace capacity | 450Kg |
| Way of moving | Auto |
| Peak motor power | 1/2HPx2 3P 220VAC |
| Tin furnace melting time | Approx: 120min |
| Cooling system | Cooling system |
| Cooling method | Forced air |
| Wash claws | Auto |
MCF-350L TOP Series Large wave soldering Detailed parameter
High efficiency weldability
Wide adaptability:
Maximum support 350mm wide PCB board, compatible with 50-450mm board width adjustment, to meet the soldering requirements of different sizes of circuit boards.
Double wave crest design:
Through mechanical wave crest generation technology, optimize solder flow, effectively reduce bridge, virtual soldering and other defects, suitable for high-density electronic component soldering.
Rapid heating:
The tin furnace is equipped with an external titanium alloy heating system, which takes only about 200 minutes to dissolve tin, supports soldering temperatures up to 350 ° C, and ADAPTS to lead-free solder processes.
Energy saving and environmental protection design
Low power consumption operation:
The whole machine running power is as low as 6KW, starting power is 22KW, compared with the traditional model energy saving more than 30%.
Flux recovery system:
Adopt top air extraction and automatic cleaning nozzle technology to reduce flux volatilization pollution and ensure a clean workshop environment.
Modular structure and easy maintenance
Preheating system:
4 independent preheating zones, total length 2000mm, support accurate temperature control from room temperature to 250℃, eliminate the risk of thermal stress and deformation of PCB board.
Removable tin furnace:
Titanium alloy corrosion resistance, capacity 300-400KG, support quick cleaning and maintenance, reduce downtime.
Transport system:
Standard double hook titanium claw transmission chain, speed 0-2000mm/min stepless speed regulation, adapt to different production beats.
MCF-350L TOP series large wave crest soldering is widely used in PCBA soldering in consumer electronics, automotive electronics, communication equipment and other fields, especially suitable for efficient mass production needs of medium and large enterprises.