AA07C00 NXT H04 7.0 Placement Nozzle
Part No.: AA07C00 / AA07T00 / AA08B00 (Codes vary slightly by batch and supplier; all refer to 7.0mm nozzles for H04 heads)
Item Name: NXT H04 7.0 Placement Nozzle
Brand: Fuji
Applicable Models: H04 placement heads on Fuji NXT series mounters (including NXT I, NXT II and derivative models). Some documents confirm certain 7.0G nozzles are also compatible with H04S heads.
Function: It relies on vacuum negative pressure to pick large-size components with 7.0mm diameter, such as large capacitors, connectors and special-shaped parts, and realizes high-precision pickup and placement. Its tip is usually made of diamond or wear-resistant steel to bear the weight of large components and resist abrasion.
- AA07C00 NXT H04 7.0 Placement Nozzle
Fuji AA07C00, AA07T00 and AA08B00 all refer to NXT H04 7.0 placement nozzles. They fit H04 heads of Fuji NXT I and NXT II mounters, and certain 7.0G versions are compatible with H04S heads. The nozzle tip is made of wear-resistant steel or diamond to bear heavy loads, designed for picking 7.0mm large components including big capacitors, connectors and special-shaped parts.
As essential SMT consumables, these vacuum nozzles deliver steady suction and high placement precision to lower component dropping rates. Both original and compatible versions are in stock with short lead times. Ideal for mass electronics manufacturing, they cut equipment wear and maintenance costs, widely used by factories for mounting large-size parts.
For inquiries, please contact us at +8613537875415 or Lizzy@smtlinemachine.com.
Visit us at Xintian Industrial Area, Baoan, Shenzhen City, China.liang
FAQ
Q1: Which equipment is the AA07C00 placement nozzle compatible with?
Compatible with Fuji NXT H04 placement head, specially used for mounting large SMD components of 7.0 specification.
Q2: What is the core function of this 7.0 nozzle?
Large-caliber vacuum design with strong and stable suction, reliably pick large inductors, connectors and other components to reduce component dropping.
Q3: Can it directly replace the original nozzle of the same model from the manufacturer?
The overall dimension, buckle positioning and vacuum channel are fully consistent with original parts, plug and play without calibration after replacement.
Q4: What production line problems will be caused by clogged or worn nozzles?
Reduced vacuum suction causes component offset and dropping; clogged nozzle triggers vacuum error and production line downtime.
Q5: How to carry out daily maintenance to extend the service life of the nozzle?
Clean tin slag and dust inside the nozzle every shift, regularly check tip wear, unclog blockages with dedicated cleaning liquid.