Best Spray Fixture Cleaning Machine

Product Features

1. Fully Automated Intelligent Cleaning Process
   1. One-Touch Operation: After loading workpieces, the system automatically executes the full process: High-pressure spray wash → Rinsing → CDA (Compressed Dry Air) water removal → Hot air drying, requiring no manual intervention.
   2. Customizable Programs: Supports presets for wash cycles, rinse modes (open/closed loop), drying temperature, etc., adapting to workpieces with varying contamination levels.
2. Dead-Spot-Free High-Efficiency Cleaning
   1. 720° Rotating Spray System: High-speed rotating basket + multi-angle high-pressure nozzles (adjustable pressure: 0.5–0.8 MPa / 5-8 kg/cm²) ensure zero residue on complex fixture surfaces.
   2. Dual-Stage Filtration: Built-in 10μm precision filter enables real-time recycling of cleaning fluid and rinse water, reducing fluid consumption costs by over 30%.
3. Energy Efficiency & Low Operating Costs
   1. Water-Based Cleaner Compatibility: Uses eco-friendly water-based cleaning agents with no toxic solvent emissions, complying with ISO 14001 standards.
   2. Energy-Optimized Design: 40% more energy-efficient than traditional steam cleaners. Per-cycle operational cost is just 1/5 of manual cleaning.
4. Industrial-Grade Durable Construction
   1. Full Stainless-Steel Body: SUS304 material resists acid/alkali corrosion, extending equipment lifespan to 10+ years.
   2. High-Capacity Loading: Work basket supports 100kg payload and oversized workpieces (φ1000mm × 480mm), enabling batch cleaning of multiple fixtures.

Key Features of Our Industrial Spray Fixture Cleaning System

1. One-Touch Automated Spray Cleaning
   Fully automated spray washer process requiring zero manual intervention.
2. All-in-One Spray Washing System
   Integrated spray washing, rinsing, and drying in a single automated fixture cleaner.
3. Premium Spray Cleaning Performance
   1. Spray-cleaned fixtures emerge surface-dry and contamination-free
   2. Directly usable in downstream processes
   3. Dramatically outperforms manual fixture cleaning methods
4. 720° Spray Cleaning Coverage
   Omnidirectional high-pressure spray cleaning ensures zero dead-angle coverage for complex fixtures.
5. Closed-Loop Spray Filtration Technology
   1. Real-time spray cleaning fluid filtration
   2. Recycles 95%+ cleaning chemicals
   3. Slashes fluid consumption by 30-50%
6. High-Volume Spray Washer Capacity
   Batch-processes multiple fixtures simultaneously, eliminating fixture cleaning labor costs.
7. Eco-Certified Spray Cleaning System
   1. Energy Star-compliant low-power spray washer
   2. Near-silent industrial spray cleaning operation
   3. Zero-VOC green fixture cleaning solution
8. Cost-Optimized Spray Cleaning
   1. Engineered for water-based spray cleaners
   2. Ultra-low spray chemical usage
   3. Lowest operational cost per fixture cleaned

Frequently Asked Questions (FAQ)

1. Q: What typical workpieces can the CN-8402SM clean?
   A: Designed for electronics manufacturing maintenance, it cleans wave soldering chains/fixtures, reflow oven carriers, condensers, printer squeegee blades, metal jigs, etc. Excels at removing hardened flux residues and oil stains.

2. Q: How does it improve efficiency compared to manual cleaning?
   A: ≤15-minute cycle time + 100kg batch processing increases efficiency by 8×. Dried workpieces can immediately re-enter production, eliminating drying delays.

3. Q: Are operating costs controllable? What about cleaner consumption?
   A: Water-based cleaners are recyclable. Filtration extends fluid life—consumption is 1/3 of traditional systems. Total operating costs are 60% lower than manual cleaning.

4. Q: Is maintenance complicated?
   A: Routine maintenance only requires monthly filter/tank cleaning. Key nozzles and pumps use modular design for easy replacement.

5. Q: Can it clean PCBAs (Printed Circuit Board Assemblies) with delicate components?
   A: Not recommended. The CN-8402SM is engineered for metal fixtures/mechanical parts. High-pressure spray may damage electronic components. Use dedicated offline cleaners (e.g., SM-8700) for PCBAs.