Your Best LED PCB cutting machine in China

The LED PCB cutting machine is mainly suitable for cutting all kinds of PCB, SMT circuit boards, aluminum substrates, LED circuit boards and LED light bars with V grooves. It has no burrs, good effect, fast speed, and does not damage the elements on the circuit board. Device.

Japan high-speed steel blades with long life span are mainly used in the LED industry, SMT industry, mobile phone/mp3 industry, electric toy industry, various electronic industries, and various industries that use circuit boards.

Main feature:

Six-knife splitter adopts a unique cutting method. The splitter is cut by six blades. The upper and lower two slices form a group to form a cutting unit. There are three groups of A/B/C.

The entire cutting process is divided into three stages. The A group blade first cuts 40% of the circuit board, and then the B blade runs through the groove cut by the A blade again to complete 40% of the cutting.

After cutting by the C group blade 20% and trimming, because each cutting amount is small, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method.

The edge of the divided circuit board Flat and smooth, the board surface is very flat, not twisted or warped, it is a machine on the market that can guarantee that the aluminum plate will not deform after cutting.

2. Due to multiple cuttings, the cutting process of the six-knife splitter is very stable, which greatly improves the positioning ability of the V-CUT slot, even if the V-CUT slot is very shallow, the V-CUT slot will not be guided If the knife jumps out, it can avoid defects.

3. Due to the low cutting force of the blades and the high-speed steel material imported from Sweden, the durability of the blades is greatly improved, and the blade life can reach more than one year when the aluminum substrate is divided.

4. Sub-board length: unlimited

5. Working thickness: 0.5-3mm

6. It is suitable for dividing the LED aluminum substrate, copper substrate, luminous tube, light strip board, glass solder board, FR1-4, display board and other long boards. Material of the circuit board to be cut: aluminum substrate, copper substrate, FR1-4, glass fiber board

7. Feeding speed: 0-700mm/sec (normally 0-300mm/sec in the market)

8. Blade material: Sweden SKH7 HSS

9. Weight: 40kg

10. Power supply: 220V/50HZ, 90W

11.After the inlet and outlet trays are installed, the size of the whole machine: 2300*370*240MM

12. Storage temperature: -20-50 degrees

LED PCB Cutting Machine: The Ultimate FAQ Guide

This guide will help you understand everything about the LED PCB cutting machine.

It covers everything you need to know about the LED PCB cutting machine, from how it works to what makes it a reliable PCB cutting machine for the PCB manufacturing factories. It also includes how you can carefully use a LED PCB cutting machine in your PCB manufacturing factory.

So before you purchase an LED PCB cutting machine, read this guide and learn everything about this machine in detail.

1. What is an LED PCB cutting machine?
2. What are the advantages of LED PCB cutting machine?
3. Can the LED PCB cutting machine damage the PCB board?
4. Can you cut a PCB without The LED PCB cutting machine?
5. What is the process of PCB cutting with the usage of a LED PCB cutting machine?
6. What are the features of a LED PCB cutting machine?
7. Can you adjust a LED PCB cutting machine?
8. How any cutting blades are present in a LED PCB cutting machine?
9. Are there any other cutting tools present in a LED PCB cutting machine?
10. Can you smoothly cut a PCB without using a LED PCB cutting machine?
11. Is it safe to use a LED PCB cutting machine?
12. What can you cut with a LED PCB cutting machine?
13. Is a LED PCB cutting machine easy to use?
14. What brands manufacture LED PCB cutting machine?
15. Who can use a LED PCB cutting machine?
16. How many stages is the PCB cutting process divided with a LED PCB cutting machine?
17. Are the blades of the LED PCB cutting machine durable?
18. Should you buy a LED PCB cutting machine for its cost?
19. Is there a PCB length limitation when you use a LED PCB cutting machine?
20. Where can you buy reliable LED PCB cutting machine?

1.    What is an LED PCB Cutting Machine?

The LED PCB cutting machine specializes in the LED aluminum board.

Using this machine, you can cut the aluminum LED panels with the LED chip present on them.

This machine’s purpose is to smoothly cut the board with the LED chip without causing any damage to the PCB.

So there are no damages or bend on the LED aluminum board when, or after, the LED PCB cutting machine performs its task.

2.    What are the Advantages of an LED PCB Cutting Machine?

Using the LED PCB cutting machine, PCB manufacturing factories and companies can benefit a lot in saving laborers.

Since these machines work independently and perform a no-damage task in de-paneling the LED aluminum PCB panel light bar, they are highly beneficial.

Moreover, they perform this task without causing any deformation or burs on the PCB.

Altogether, using a LED PCB cutting machine can offer the advantage of highly efficient LED PCB cutting – without the need for labor.

Some advantages of using this machine include:

• Suitably cutting aluminum board
• Cutting the board without warping
• Cutting the board with very low stress

3.    Can the LED PCB Cutting Machine Cause Damage to the PCB Board?

No, using an LED PCB cutting machine means ensuring that the PCB board will not face any kind of damage during this process.

Yet, different PCB cutting machines work differently.

Therefore, you can’t expect every PCB cutting machine to perform efficiently as the best one.

It is crucial to look for the best-LED PCB cutting machine to ensure that the PCB board isn’t damaged during the cutting process.

You can look for the best LED PCB cutting machine from reliable sources like Cnsmtline.

4.    Can you Cut a PCB without The LED PCB Cutting Machine?

There can be limited ways of cutting an LED PCB board, but the safest and most reliable method is to use a LED PCB cutting machine.

Since this machine is a trusted source for cutting unlimited LED PCBs without any interruptions or damage on the LED PCBs, they are highly efficient and reliable.

Moreover, you can also ensure personal safety while using the LED PCB cutting machine during the PCB de-paneling process.

With all this being said, we can indeed say that currently, this is the only machine that guarantees aluminum board cutting without causing any type of deformation.

5.    What is the Process of PCB Cutting with the Usage of a LED PCB Cutting Machine?

A specific PCB cutting process is maintained every time the LED PCB cutting machine cuts the PCB.

This process involves:

• Firstly, the circuit board is cut with six blades (using a unique cutting method). A group of blades where one is an upper blade and the other is a lower blade performs this task. This group is also called the cutting unit of the LED PCB cutting machine.
• Overall, the machine has three groups (A, B, and C).
• The process of cutting the board is divided into each of these groups, making it three stages. Group A cuts 40% of the board, then group B’s blade knife cuts the groove cutting, and then group A group completes 40% of the cutting. Afterward, group C cuts the last 20% of the board with it’ blade and performs the finishing.
• Since each stage’s cutting volume is small, the stress produced during the cutting process is 80% less than the traditional cutting progress; it leaves the PCB board’s surface smooth. So there is no need of warping on the PCBs surface after cutting it with the LED PCB cutting machine.

6.    What are the Features of a LED PCB Cutting Machine?

There are multiple features of an LED PCB cutting machine.

This machine offers a lot to the large mass PCB manufacturing businesses.

These features include:

• You can use this machine for cutting v-cut PCB, fiberboard, aluminum PCB, FR4, LED PCB, and PCBs. Additionally; there are no board length limitations for using a LED PCB cutting machine on these boards.
• The three pairs of blades present in this machine guarantee that the aluminum plate will be cut smoothly. So there are no damage or deformation issues on the board after the cutting process.
• The three times cutting process of a board with the LED PCB cutting machine makes the cutting process very smooth. It is also very beneficial to locate the v-cut with these multiple cuttings. As a result, incidents like v-cut jumping out afterward can be avoided using the LED PCB cutting machine.
• Since the blade used in this machine is of high-quality and uses small cutting force, its efficiency and long life are guaranteed.
• For the perfect cutting effect, the LED PCB cutting machine’s blades are calibrated through the excitation double-frequency laser interference measurement instrument.

7.    How is an LED PCB Cutting Machine Suitable for Large Mass PCB Assembly?

The LED PCB Cutting Machine is a powerful machine that serves as an LED stripes PCB separator.

This machine can separate up to 20 PCBs simultaneously.

Hence, it is the perfect PCB cutting machine for the PCB manufacturing factories that deal with large mass production.

Additionally, this machine is also suitable for PCB LED stripes cutting because it has high efficiency.

It means that you can save a lot of the manufacturer’s labor work and costs with an LED PCB Cutting Machine.

8.    How Many Cutting Blades are Present in a LED PCB Cutting Machine?

There is a total of 6 cutting blades present in the LED PCB cutting machine.

Each of these blades performs a specific task of cutting the LED PCB to a particular extent.

There are three stages, A, B, and C.

Different blades are used in each of these stages, and at the end, the blade is used to perform the C stage of finishing the PCB cutting process.

9.    What is the PCB Length Limitation for Cutting it through a LED PCB Cutting Machine?

When you use an LED PCB cutting machine for cutting an LED PCB board, there are no length limitations.

These machines are highly suitable and reliable for cutting unlimited lengths of boards.

Not just that, these machines can also suitably cut the unlimited length v-cut PCB, aluminum PCB, PCBA, and FR4 PCB, etc.

So you can sue this machine for cutting any type of PCB or similar boards without any length restrictions.

10.    Can you Smoothly Cut a PCB without Using a LED PCB Cutting Machine?

No, it is not possible to cut a PCB board smoothly without using an LED PCB cutting machine.

Since this machine uses reliable methods and high-quality components to perform the LED PCB cutting task, it is the best way to separate LED stripes from PCB.

11.    How can you Safely Use the LED PCB Cutting Machine?

The process of using a LED PCB cutting machine is safer than other traditional PCB cutting methods.

However, for extreme safety and security, the laborer must perform special measures.

These measures include:

• Wear safety gloves and a nose mask for protection
• Avoid cuts by wearing safety gloves.

12.    What can you Cut with a LED PCB Cutting Machine?

Using a PCB cutting machine allows you to cut multiple products. It is not just limited to cutting a specific type of LED PCB cutting.

Instead, you can use this machine further to perform the same process in different ways like:

• V-cut PCB (highly suitable for this)
• PCB boards in single pieces
• PCBs of any length
• PCB cutting with three blades (to avoid crashing and damage)

13.    Why should you Not Buy a Cheap LED PCB Cutting Machine?

While a cheap Led PCB cutting machine may be easy to afford for your business, it won’t be a long-lasting option.

These machines can quickly fail while or after usage, so they might not be an efficient investment.

Moreover, most cheap LED PCB cutting machines are poor machines that aren’t easy to maintain.

As a result, these machines work in a complicated way.

Additionally, poor LED PCB cutting machines can be difficult to start when you stop using them for a few days.

Due to this reason, they can increase the production cost significantly.

All in all, it is better that you purchase an excellent precision LED PCB cutting machine instead of a poorly performing and cheap option.

14.    Can you Adjust the LED PCB Cutting Machine Blades?

Yes, the LED PCB cutting machine blades can be adjusted according to the cutting requirements.

For enhancing the cutting accuracy to the highest, there are a few ways to adjust the LED PCB cutting machine’s blade.

It includes:

• Adjusted above and below the round knife
• Freely adjusted of the through the X, Y-axis.

15.    Who can Use a LED PCB Cutting Machine?

An LED PCB cutting machine can be used for efficiently cutting various products; these products can include:

• LED aluminum PCB panel
• LED copper substrate
• LED T8 tube, etc.

Hence, if you have a PCB product manufacturing business/factory, then the LED PCB cutting machine is a must-have PCB manufacturing machine for you.

Its efficient performance and accurate cuts make it the most suitable PCB board cutting machine for all kinds of boards.

16.    How are the Blades of an LED PCB Cutting Machine Calibrated?

The blades of an LED PCB cutting machine are the most critical component of these machines.

These blades perform the primary cutting task of the LED PCB.

Therefore, they need to be very efficient and robust.

For better performance and reliable cutting for the PCB, the LED PCB cutting machine blades are calibrated by the excitation double-frequency laser interference measurement instrument.

With this instrument, the blades are given the same shape and sharpness on the rear and front sides.

As a result, both these sides cut the same places in the v cut.

The blades calibrated with this instrument are more reliable and offer a more accurate cutting effect on the LED PCB.

17.    Are the Blades of the LED PCB Cutting Machine Durable?

As mentioned earlier, using an LED PCB cutting machine to cut the board has 80% less force than the traditional cutting process.

Due to this low cutting force applied on the aluminum LED separator, the blades working life exceeded.

As a result, the LED PCB blades cutting machine work for a longer time and serve more for the cost you pay.

18.    Should you Buy a LED PCB Cutting Machine for its Cost?

An LED PCB cutting machine is the only reliable option for cutting the LED PCBs without making the PCBs face any damage.

That is why it is a highly reliable machine.

Hence, considering a LED PCB cutting machine for your PCB manufacturing business/factory is very crucial.

You can expect these machines to serve you for years and gain efficient service out of their cost.

19.    Where can you Buy a Reliable LED PCB Cutting Machine?

For buying the best quality and highly efficient LED PCB cutting machine, you can look for reliable manufacturers that offer the best quality PCB manufacturing machines, including the LED PCB cutting machine.

Cnsmtline is a reliable option to purchase the Led PCB cutting machines for your PCB manufacturing factory.

Since these manufacturers have all the LED PCB cutting machines and the SMT Lien products, they are highly reliable.

20.    Do Cnsmt Offer Customized LED PCB Cutting Machines?

Yes, the Cnsmt offers all kinds of customized LED PCB cutting machines depending upon the factory requirements.

So you can purchase the best quality LED PCB cutting machine from the Cnsmtline and have them customized according to the PCB cutting requirements of our business/factory.

I hope you have all the information you needed to explore the LED PCB cutting machine.

However, if you have any more queries, feel free to contact us.

We have more products that not upload on website,If you can’t find the device you want on our website, please email or contact us online for more information!