Best YAMAHA Feeder Supplier in China
- CNSMTis one of the largest suppliers in China. We have the most complete supply of goods, advanced technology, and provide you with reliable technical support and a one-year warranty.
- Innovative parts supply
- Auto feed of tape-mounted parts
- Superb operability
Part Name: YAMAHA FEEDER
Application: YAMAHA Pick and place machine, YAMAHA surface mounting machine, YAMAHA chip mounter
For Users SERVICE INFORMATION
MACHINE TYPE: SS feeders and ZS feeders ISSUED
CLASSIFICATION: Maintenance and Tips REFERENCE: H018065, SS feeder user’s manual and ZS feeder user’s manual
Precautions for installing and removing electronic feeders Follow the below directions when installing and/or removing electronic feeders.
Avoid strong impact on the feeder bank’s front plate Install an electronic feeder to a feeder bank gently without applying strong impact on the feeder bank’s front plate. Repeated impact on the front plate may damage the front plate possibly causing insertion and removal of the feeder block difficult.
SS feeder or_ZS feeder
Installing and removing an SS feeder Before installing or removing an SS feeder, raise the handle to fully open the clamping lever assembly. Then raise the rear part of the empty tape box slightly and install or remove the feeder to or from the feeder bank.
Empty tape box
Clamping lever assembly
Installing and removing a ZS feeder Before installing or removing a ZS feeder, hold the handle and grab the unclamping lever to fully open the clamping lever assembly. Then align the feeder’s under rail and handle with respective guides on the feeder bank. Then install or remove the feeder to or from the feeder bank.
Clamping lever assembly
Precautions for installing and removing electronic feeders
KLJ-MC700-010/00 (ZS56mm）YAMAHA FEEDER
The YS / SS and ZS Feeder Fingers are precision machined tape guides designed to replace the original guide on Yamaha feeders. The fingers use a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm without attaching a cover tape leader. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changeover time by 80%. The new release works with both paper and embossed tapes.
YAMAHA KLJ-MC900-011 88MM ELECTRIC FEEDER
YAMAHA ELECTRIC FEEDER Key benefits:
Attaches easily to your existing feeder
Handles cut tape as short as 1″ / 25.4mm
Loads in less than 5 seconds
Eliminates cover tape jams
Reduces setup time by eighty-percent
CNSMTis one of the largest suppliers in China. We have the most complete supply of goods, advanced technology, and provide you with reliable technical support and a one-year warranty.
Perhaps you also need the following products ：
|Description||Part Number||Model||Size||Drive Model|
|Yamaha Electric SS feeder||KHJ-MC100-001||SS||8MM||ELECTRIC|
|Yamaha Electric SS feeder||KHJ-MC200-100||SS||12/16MM||ELECTRIC|
|Yamaha Electric SS feeder||KHJ-MC400-002||SS||24MM||ELECTRIC|
|Yamaha Electric SS feeder||KHJ-MC500-001||SS||32MM||ELECTRIC|
|Yamaha Electric SS feeder||KHJ-MC600-001||SS||44MM||ELECTRIC|
|Yamaha Electric SS feeder||KHJ-MC700-001||SS||56MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MCN00-200||ZS||4MM||ELECTRIC|
|Yamaha Electric ZS feeder||KMV-MC100-011||ZS||8MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC200-011||ZS||12/16MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC400-011||ZS||24MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC500-011||ZS||32MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC600-011||ZS||44MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC700-010||ZS||56MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC800-011||ZS||72MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MC900-011||ZS||88MM||ELECTRIC|
|Yamaha Electric ZS feeder||KLJ-MCA00-011||ZS||104MM||ELECTRIC|
If you need it, please contact us.