Original YAMAHA ZSY Electric feeder From Japan
CNSMT is one of the well-known sellers of YAMAHA Electric feeder in China. This electric feeder is suited for both big and small enterprises. With our yamaha electtric feeder YAMAHA KMV-MC100–011 8MMyou will be able to have the best productivity rates.
- NEW YAMAHA KMV-MC100–011 8MM ELECTRIC FEEDER is fully automatic SMT feeder.
- High-speed and more efficient .
- Advanced upper/lower vision system.
KLJ-MCN00-200 YAMAHA ZSY 4mm FEEDER
KMV-MC100–011 YAMAHA ZSY 8MM FEEDER
KLJ-MCN00-200 YAMAHA ZSY 12/16mm feeder
KLJ-MCN00-200 YAMAHA ZSY 24mm feeder
KLJ-MCN00-200 YAMAHA ZSY 32mm feeder
KLJ-MCN00-200 YAMAHA ZSY 44mm feeder
KLJ-MCN00-200 YAMAHA ZSY 56mm feeder
KLJ-MCN00-200 YAMAHA ZSY 72mm feeder
KLJ-MCN00-200 YAMAHA ZSY 88mm feeder
If you need other parts,please contact me directly,you can connect us.
Precautions for installing and removing electronic feeders
Follow the below directions when installing and/or removing electronic feeders.
1 Avoid strong impact on the feeder bank’s front plate
Install an electronic feeder to a feeder bank gently without applying strong impact on the feeder bank’s front plate. Repeated impact on the front plate may damage the front plate possibly causing insertion and removal of the feeder block difficult.
2 Installing and removing an SS feeder
Before installing or removing an SS feeder, raise the handle to fully open the clamping lever assembly. Then raise the rear part of the empty tape box slightly and install or remove the feeder to or from the feeder bank.
3 Installing and removing a ZS feeder
Before installing or removing a ZS feeder, hold the handle and grab the unclamping lever to fully open the clamping lever assembly. Then align the feeder’s under rail and handle with respective guides on the feeder bank. Then install or remove the feeder to or from the feeder bank.