MSO-450 Offline selective wave soldering machine
Offline selective wave soldering operates independently from production lines. Its integrated design features adjacent preheating and soldering modules with manual PCB handling, achieving space-efficient operation through human-machine coordination
MSO-450 Offline selective wave soldering machine advantage
- It can soldering PCB which can not be realized by ordinary wave soldering.
- The soldering temperature can be accurately controlled.
- Can soldering various types of PCB board.
- Save solder and flux.
- Various nozzle sizes, adapt to different soldering needs.
- Specification
- PCB parameter
- Selective spray system
- Selective Soldering System
- Other system
| Specifications | Parameter |
| Overall Dimensions | 1350L*1500W*1650H (mm) |
| Machine frame | Steel structure+baking paint |
| Operating height | 1150±30mm |
| Board pick – and – place method | Manual pick – up and placement |
| Machine appearance | Closed – type |
| Programming mode | Picture programming, Gerber document, visual teaching programming, etc |
| Real – time soldering monitoring | Standard equipment |
| Weight | Approx.650KG |
| Power supply | 1φ 220V 50/60HZ |
| Total power | 14KW14 kilowatts |
| Operating mode | PCB board XYZ axis movement |
| PCB size | Min:30(L)*30(W); Max:450(L)*400(W)(mm) |
| Top component height | Max80mm |
| Bottom component height | Max30mm |
| PCB Weight | Max10Kg |
| PCB Process Edge | >3mm |
| Spray movement mode | PCB movement in XYZ axis |
| Spray flux volume | 1L1 liter |
| Spray flux add mode | Manual |
| Spray nozzle type | Needle |
| Spray cycle time | 1 Sec/soldered dot(The minimum spray time can be set to 0.1 seconds) |
| Spray movement precision | ±0.1mm |
| Spray movement speed | Adjustable within 0 – 500mm |
| Spray flow control | pressure gage + flow valve |
| Soldering movement mode | PCB movement in XYZ |
| Movement mode | Servo motor + linear rail |
| Solder feeding mode | Manual |
| The number of soldering solder nozzles | 1个one |
| Solder capacity | 15KG15 kilograms |
| Solder melting time | 45min forty – five minutes |
| Solder power | 1.2KW1.2 kilowatts |
| Solder nozzle size | Standard with 5 solder tips (3-64-8 6-10 8-12 10-14) |
| Solder cycle time | 1~5Sec/ soldered dot |
| Temperature control mode | PID+SSR |
| Temperature setting range | Max350OC |
| Temperature accuracy | ±2OC |
| Waver height | Max 0-8mm |
| Soldering precision | ±0.1mm |
| Solder dross | 0.2Kg/8H(Not N2 protection);0.01Kg/8H( N2 protection) |
| N2 protection system | |
| N2 protection mode | Nozzle and solder pot |
| N2 consumption | 1.5M3/h(Nitrogen concentration>99.999%) |
| N2 flow control | Glass rotor flowmeter |
| Exhaust system | |
| Top cover exhaust | Customer supply |
| Exhaust quantity | 1 PCS |
| Exhaust vent diameter | 150mm |
| Exhaust volume | About 15m³/h(Provided by the customer with an external exhaust channel) |
| Control system | |
| Control mode | PC+ motion control card |
| PCB Process parameter | Setting, save , open in the PC screen |
| Security :Safety grating Door sensor | |
| Other | PCB counting, message, alarm can be read in the PC |
MSO-450 off-line selective wave soldering Additional information

The core parts of the machine
| Name | Brand |
| Controlling | |
| Industrial PC | Philips |
| Controller | positive motion |
| SSR | Jiale |
| Box relay | Omron |
| Switch | Mingwei |
| Contactor | CHNT |
| AC contactor | Schneider Electric |
| Sensor | Omron |
| Motion parts | |
| Servo motor | Inovance |
| Servo driver | Inovance |
| Ball screw | INtime |
| linear guild | INtime |
| Pneumatic | |
| Pressure sensor | AirTAC |
| Air cylinder | AirTAC |
Schematic diagram of the working principle of MSO-450

Optimized Introduction for MSO-450 Off-Line Selective Wave Soldering System:
Basic Operation: Selective Soldering Process
This guide outlines the fundamental preparation steps for the MSO-450 off-line selective wave soldering system.
Preparing the Selective Wave Soldering Machine:
Connect the power supply and activate the solder pot heater.
Verify the proper function of the selective wave soldering machine’s timing switch.
Ensure the integrated solder wave exhaust system (fume extraction) is operational.
Critical for Selective Soldering: Calibrate the solder pot temperature indicator:
Measure the temperature approximately 10-15 cm below the solder liquid surface using a glass thermometer or contact thermometer.
The variance between the indicator reading and thermometer measurement must be within ±5°C for precise selective wave soldering.
Q&A
Question:
Is the product invoiced?
Answer:
Yes, we will provide the invoice before shipment.
Question:
When will the product be shipped?
Answer:
We will complete the delivery within 3 days after your payment, and generally deliver the goods in about 35 days.
Question:
Does the product support multiple languages?
Answer:
Of course, different operating languages and soldering programming software can be set up on the product host.

Please contact us
+86 13537875415
info@cnsmtlinemachine.com














