Best steel mesh cleaning machine Supplier in China

Additional information for SM-8160 ultrasonic spray steel mesh cleaning machine

The ultrasonic spray cleaning machine is mainly used for cleaning the screen board of SMT in the electronics industry with water-based cleaning liquid. Achieve 100% cleanliness and environmental protection using the industry’s most advanced cleaning process.

The machine is composed of frame, spray system, ultrasonic system, rinsing system, lifting mechanism, drying system and water circulation filtration system. The machine uses electricity as the main energy source, manually put the screen into the cleaning room, set the spray, ultrasonic, drying and other related parameters in the touch screen, press the start button.

The screen will be automatically sprayed, ultrasonic cleaning, rinsing and drying. When the set cleaning process is finished, the operation is automatically stopped and reset in order to achieve the next workflow. This machine is a new type, high performance automatic cleaning equipment, very convenient for operators to clean the board. The auxiliary consumables used in the equipment are water and water-based environmental cleaning agent and PP cotton filter element, without any safety risks.

Cleaning process

Cleanse

The liquid is pumped through the spray rod, and the liquid is supplied to the surface of the ultrasonic plate for short distance ultrasound, and the high pressure liquid is sprayed up and down.

Rinse

Water is used as the bleach solution, which is added by the external pipe, and the rinsing time can be set on the touch screen. When rinsing, the residual material on the fixture surface is impinged by the pressure generated by the water pump. The stripped pollutants are filtered out through the filter device to avoid secondary pollution and ensure the cleaning effect.

Drying

The compressed air is used to wind cut the water droplets and water vapor on the net board through the air nozzle.

Product characteristics

Innovative patented design, near-touch ultrasonic combined with spray cleaning without immersion.

The ultrasonic source is 1-2.5mm away from the steel mesh from which the cleaning liquid flows and scans up and down to avoid blind areas.

The board is quickly dried by the high-pressure air nozzle during the lifting process, which solves the bottleneck of water-based cleaning and drying.

Quickly and efficiently clean the microprint leaks and solder paste in the printing area of the steel mesh

Solder paste cleaning cycle is about 10 minutes

PLC automatic control double program setting mode push-button operation is simple, safe, reliable and easy to maintain.

Design and configure a circulating filtration system for MPC cleaning technology with low operating costs and environmental protection.

One-click operation, the whole cleaning process is fully automatic, automatic adding and discharging of bleaching liquid without manual intervention. Equipment low energy consumption, low noise, no pollution, energy saving and environmental protection, the overall stainless steel structure, small footprint.

Cleaning, rinsing, drying function in one. The parameters of adding and discharging liquid, cleaning and rinsing can be set through the man-machine interface.

Product advantage

• Added rinsing function

Compared with similar products of other brands, this equipment has added rinsing function. Make cleaning more thorough.

• Unique liquid reflux

The tank is specially designed to move the liquid and the rinse water to switch back flow, there will be no cross-liquid phenomenon.

• Close ultrasound

The equipment uses a new ultrasonic technology in which liquid flows from a close distance, and the mesh is cleaned more thoroughly.

Product application field

If you want to know more about the product, please contact us