XJV-2D Electric V-Cut Depaneling Machine
XJV-2D Electric V-Cut Depaneling Machine is Designed for separating PCBs with V-cuts, its electric blade cuts at constant speed with low stress to avoid board damage.
- Electric cutting separation for PCB/PCBA panels with V-Cut grooves.
- For circuit board processing of sampling, small and medium batches.
- Low-stress cutting to reduce defects of cracked components and detached pads.
- Replace manual board breaking to improve depaneling consistency and efficiency.
- Suitable for rigid PCB, thin module boards and other V-groove boards.
- XJV-2D Electric V-Cut Depaneling Machine Specifications
- Key Features
- Advantages
| Parameter | Details | |
| Splitting Length | 400mm | 600mm |
| Splitting Speed | 0-400mm/s Adjustable | |
| Splitting Thickness | 0.5-3.5MM | |
| Operating Voltage | 220V AC 500W | |
| Machine Weight | 55KG | 7OKG |
| (L*W*H) | 754*450*495MM | 935*490*480MM |
- The sliding speed of the circular blade is adjustable.
- The distance between the upper circular blade and the lower straight blade can be accurately adjusted to accommodate the depth of the V-groove and tool wear.
- The cutting speed is controlled by a knob, and the cutting stroke can be freely set with a display on the touch screen.
- A conveyor belt can be added upon request to enhance performance.
- Equipped with an electric eye for safety protection to ensure safe production.
- Electric-driven cutting, no air source required, easier wiring and installation.
- Low-stress cutting to protect precise components on boards.
- Smooth burr-free cutting edge, less board delamination.
- Compact body, small footprint on production line.
- Simple operation and convenient adjustment, easy for new operators.
- Stable running with low failure rate, hassle-free daily maintenance.
Why choose this product?
- Pure electric drive, no air compressor needed, saving auxiliary equipment cost.
- Low cutting stress, effectively avoid component cracking and pad falling off to raise yield.
- Smooth burr-free cut, less board delamination with good finished appearance.
- Compact body with small footprint, ideal for small production lines and sampling workshops with limited space.
- Easy operation and adjustment, low staff training cost and quick production launch.
- Stable machine operation, easy maintenance and low long-term mass production maintenance cost.
- Custom fixtures available, compatible with various V-cut PCB and PCBA panels.
How It Works
- The machine is equipped with an electric drive module to supply cutting power without pneumatic air supply.
- Fix PCBA panels with V-Cut grooves on special fixtures for positioning.
- Upper and lower rigid blades align precisely with preset V-cut grooves of boards.
- The motor drives the blade set to close at a constant speed and separate single boards smoothly along V-grooves.
- Uniform force during cutting brings extremely low stress to avoid damaging on-board components.
- The electric blade set resets automatically after cutting for the next cycle.
Application Process
- Install and lock matched fixture according to PCBA size.
- Place V-Cut panel into fixture for accurate positioning.
- Start machine, motor drives upper and lower blades to cut.
- Separate single PCBA smoothly along board V-Cut groove.
- Blade set automatically returns to initial position after cutting.
- Take out finished boards and load new panels for continuous operation.
Requirements
- Place on flat and stable workbench, keep the machine horizontal.
- Connect stable 220V mains power with reliable grounding to prevent electric leakage.
- Working ambient temperature: 0℃~40℃, dry and low dust, free of corrosive gas.
- No strong vibration in operation area, keep away from high-power equipment to reduce electromagnetic interference.
- Boards to be processed must have standard V-Cut grooves, groove depth matches blade stroke.
- Clean blade set and guide rails regularly, add lubricating oil on schedule for maintenance.
- Check blades for damage and confirm fixtures are tightly locked before startup.
What It Is Used For
- Electrically cut PCB and PCBA panels with V-Cut grooves to separate single boards.
- Meet depaneling demands for sampling, small and medium batch circuit boards.
- Low-stress cutting reduces defects like cracked components and detached pads.
- Replace manual board breaking to improve depaneling efficiency and uniformity.
- Suitable for V-groove separation of rigid PCB and various small module boards.
Conclusion
XJV-2D Electric V-Cut Depaneling Machine adopts full electric drive structure without supporting air compressor, which simplifies installation and wiring. Driven by motor, the blades perform low-stress cutting along board V-Cut grooves with even force, effectively avoiding component cracking and pad detachment. It delivers smooth, burr-free cutting surfaces and prevents board delamination. Compact in size with small footprint, it fits sampling workshops and small & medium production lines.
Featuring easy operation and adjustment, stable operation and simple maintenance, it supports custom fixtures compatible with various V-cut PCB and PCBA panels. Replacing manual board breaking to boost depaneling efficiency and product yield, it is the preferred economical depaneling equipment for workshops without air supply.
Do you provide after-sales service?
- Our professional after-sales service team will quickly resolve any emergencies you may encounter during use.
Warranty period?
- -The entire machine is covered by a one-year warranty, with free technical support provided after that year.
Do you provide installation and commissioning?
- On-site installation and commissioning will incur additional fees, including accommodation and airfare.
Shipping method?
- Typically, shipping is by sea or land. Air freight is more expensive for urgent needs.
Packaging and Delivery Information:
Delivery: Standard equipment is in stock, while less commonly used models require 10-15 days depending on the situation..
Minimum Order: We accept orders for a single machine or mixed orders to suit your needs.
Transportation: Products are shipped either in bulk or via containers, depending on the order size and destination.
Payment Terms: Flexible payment options are available, including L/C, D/A, D/P, T/T, Western Union, and MoneyGram.
Price: Prices are negotiable to ensure you receive the best possible value.
Packaging: We offer both standard export boxes and robust hardwood packages to ensure your order arrives safely and securely.
If you have any other questions, please contact us to obtain more information
Send Your Inquiry