Several reasons for choosing this Feeder product

How can you determine if you need this electric feeder?

• If your production line pursues precision and stability, and environmental conditions, such as air pressure and temperature, fluctuate greatly, then you need higher quality electric feeders.
• If you require higher production efficiency and automated operation, and want to reduce manual intervention and improve changeover efficiency, then the automatic adjustment and electronic control characteristics of the NXT-NT series better meet your production needs.

What are the features of the NXT-NT series of Electric feeder?

1.The NXT-NT series feeder is powerful.

1. It has front and back fine-tuning function to obtain higher feeding accuracy;
2. It has output speed adjustment function to adapt to various feeding scenarios;
3. It is equipped with advanced dual motors, which can precisely adjust the feeding force, effectively improving placement quality;
4. 6/7/8 programs can be switched between each other to cope with diverse production scenarios and tape widths, reduce manual intervention, and facilitate production management.

2.Compared to other similar types of NXT feeder series.

This series feeder has a wide range of application scenarios, supporting components such as resistors, resistor arrays, capacitors, inductors, LED beads, terminals, ICs, diodes, transistors, fuses, transformers, button switches, surface mount sockets, etc.

3.Compatible with various NXT series made-in-China placement machines.

Placement machines such as Lide, Rongde, Huapu, Bosaide, Yibeituo, Shengshitong, Hanchengtong, Luyuan, Jinghao, and other FUJI universal type placement machines can use this electric feeder.

Compared to pneumatic feeders, electric feeders have higher control accuracy, lower noise levels, higher environmental stability, simpler adjustment methods, higher production efficiency, and wider compatibility.

Applicable for 8/12/16mm tape width. High feeding accuracy, with only ±0.02mm error in the X/Y axis direction. Maximum feeding speed can reach 70,000 CPH. Supports smallest component size of 0201 ~ 0.60*0.30mm.

4.Parameter Specifications

5.Product Focus

6.FAQ

1.Which models of pick-and-place machines are NT electric feeders suitable for?

This series of feeders are mainly designed for FUJI NXT series pick-and-place machines and can be compatible with NXT II, NXT III, H04/H08/H12 and other modules. Some models of JUKI, YAMAHA, Samsung and other machines can also be compatible.

2.How much can an electric feeder improve production efficiency compared to a pneumatic feeder?

According to our actual tests, the NT electric feeder can reduce the material changeover time by an average of 20% and increase overall efficiency by about 10%. Due to its higher reliability, it also reduces downtime.

3.How accurate is the NT series electric feeder?

As shown in the parameter table above, we have used precision stepper motors and algorithms on the feeder. The feeding accuracy of the feeder can reach ±0.02mm. Compared with the ±0.1mm accuracy of traditional pneumatic feeders, it is more suitable for the placement of components such as 0201 and 01005.

4.What is the maintenance cycle of NT feeder?

It is recommended that pneumatic feeders be maintained every 800 hours and NT electric feeders every 1,500 hours. The maintenance mainly involves cleaning and lubricating the transmission parts.

5.What widths of material tape is the NT electric feeder compatible with?

Our feeder supports material tape widths of 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, and 56mm, meeting the supply requirements of various types.

If you are interested in our products, please don’t hesitate to contact us.