Best Automatic Solder Paste Printer Supplier in China
GSK is an intelligent solder paste printer that enables engineers to “free their hands“. It is equipped with real-time monitoring capabilities, enabling intelligent management of the production process.
The brand-new UI interaction interface, BTB and HTH production modes, can significantly enhance production efficiency, greatly increasing the production volume per unit area, and are suitable for small and medium-sized enterprises with limited workshop lengths.
- Newly designed adjustable CCD optical path system
- Closed-loop pressure feedback system
- Dripping-type high-speed stencil mesh cleaning system
- High-precision PCB thickness adjustment platform
- Automatic solder paste inspection function
- Simple specifications
- Feather
- Download
| Maximum substrate size | 400*340mm |
| Minimum substrate size | 50*50mm |
| Substrate thickness size | 0.4~6mm |
| Stencil frame size | 470*370mm~737*737mm |
| Transmission direction | L-R, R-L, same in same out |
| Cleaning method | Wet wipe, Dry wipe, Vacuum |
| Power requirement | AC:220 +10%,50/60Hz 2.2KW |
| Equipment size | L1460mm*W1150mm*H1380mm |
Presenting the details of GKG GSK Automatic Solder Paste Printer to you
1.Core Advantage
1.GSK has a superior ability to obtain information. It can monitor the internal temperature and humidity of the machine in real time through the sensors inside the machine.
The printing process uses high-definition cameras, and the scanning function can conduct real-time monitoring of the production.
2.In terms of equipment parameter adjustment during production processes, the printer can be connected to SPI to enable real-time detection of the solder paste status, thereby enhancing work efficiency.
3.The New UI interaction interface can provide engineers with a more efficient and reasonable experience during programming and line switching.
When the equipment enters the production state, the UI will integrate the necessary production information and display it, allowing operators to have a clear understanding at a glance, further enhancing the equipment usage experience and production efficiency.
4.Another major core advantage of GSK’s solder paste printer is its ability to achieve BTB (Back To Back) and HTH (Hand To Hand) production.
This enables the combination of two printer into one, while reducing the occupied area of the production line and significantly increasing the production efficiency per unit area.
It’s as if replacing the racing car with a more powerful engine, achieving a “spurt” in production.
5.The newly upgraded optical path system can better identify the MAKR points and perfectly meet the traceability requirements of the current production line. This maximizes the utilization rate of the equipment.
6.Supporting users’ customization needs, based on the production requirements of customers, we conduct customized assembly to achieve perfect adaptation to the customers’ production lines.
The industrial 4.0 concept of the printer has perfectly solved this problem. By equipping a powerful software system, it enables users to solve the problems related to equipment parameters, personnel debugging information, and material monitoring.
We are committed to providing the best solution for your production line!
Machine dimension drawing
2.GSK Solder Paste Printer Specification parameters
| Performance | Parameters |
| Repeated Positioning Accuracy | ±12.5μm@6 CPK≥2.0 |
| Repeated Printing Precision | ±22μm@6 CPK≥2.0 |
| Excluding Cleaning Printing | 18s/pcs |
| Processing CT | 4min |
| Line Change CT | 2min |
| Laminate Processing Parameters | |
| Laminate Dimension | 400*340mm |
| Laminate Thickness | 0.4~6mm |
| Mechanical Range of Capture | 528mm*340mm |
| Maximum Laminate Weight | 4kg |
| Marginal Gap of Laminate | 3.5mm |
| Height over the Top | 15mm |
| Tranmission Height | 900±40mm |
| Transmission Speed | 1500mm/s(Max) |
| Way of Transmission | One-piece transportation guide rail |
| Tranmission Direction | L-R |
| R-L | |
| Enter and exit together | |
| Laminate Support Method | Magnetic needle (65mm) |
| Supporting block (65mm) | |
| Automatic leveling platform | |
| Laminate Clamping | Manual tablet pressing |
| Flexible side clamps | |
| Printing Parameters | |
| Printing Speed | 10~200mm/sec |
| Printing Pressure | 0.5~10Kg |
| Printing Mode | Single or double squeegee printing |
| Squeegee Type | Rubber squeegee/steel squeegee(angle:45/55/60) |
| Stripper Distance | 0~20mm |
| Stripper Speed | 0~20mm/sec |
| Size of Stencil Frame | 470*370mm~737*737mm |
| Positioning Method of Stencil | Automatic Y-direction positioning |
| Cleaning Parameters | |
| Cleaning Method | Dry wiping, wet wiping, vacuum |
| High speed cleaning | Integrated & weave cleaning |
| Cleaning System | Side spray type |
| Cleaning Stroke | Automatic generation |
| Cleaning Position | Post cleaning |
| Cleaning Speed | 10-200mm/sec |
| Consumption of Cleaning Fluid | Auto & Manually adjustable |
| Consumption of Cleaning Paper | Auto & Manually adjustable |
| Image Parameters | |
| Fild of Vision of Image | 10*8mm |
| Camera Type | 130 Thousand CCD digital camera |
| Image Pickup System | Up-down imaging, stepless adjustment of light source |
| Capture CT | 150ms |
| Type of Datum Point | Standard Fiducial Mark Shape |
| Such as circle, square, rhombus, cross | |
| Pad and profile | |
| Mark Size | 0.3-6mm |
| Number of Marks | Max:4pcs |
| Number of Fool Proof Points | Max:1pcs |
| Machine Parameters | |
| Power Requirement | AC:220 ±10%,50/60Hz, 2.2KW |
| Requirement of Compressed Air | 4~6kgf/cm² |
| Gas Consumption | About approx:5L/min |
| Temperature of Working Environment | -20℃~+45℃ |
| Humidity of Working Environment | 30%~60% |
| Machine Height (excluding tricolour light) | 1460(H)mm |
| Machine Length X-direction | 1150(L)mm |
| Machine Width Y-direction | 1380(W)mm |
| Machine Weight | Approx: About 900Kg |
| Load-bearing Requirement of Equipment | 650kg/m³ |
2.Core device
Precision Vision System: Utilizing the latest adjustable CCD optical path system, combined with ring light and coaxial light, both brightness can be adjusted continuously.
This enables the accurate identification of various uneven Mark points, and is suitable for PCBs of various colors such as tin-plated, copper-plated, gold-plated, tin spraying, and FPC.
The software system of the G9+ printer can be connected with SPI to achieve closed-loop control.
After receiving the printing information from SPI, the machine can automatically make adjustments within 3 sheets of board based on the offset amount, and clean the stencil mesh to improve product quality.
3.FAQ
1.Can the reproducibility of the printer printing ±0.022 be maintained stably in production?
Sure, this accuracy is based on the machine frame and transmission system, and is enhanced by temperature compensation as an auxiliary measure, resulting in very high reproducibility.
2.Do GSK printer have any requirements for the production workshop?
GSK has strong adaptability. The optimal working temperature is usually 20-26℃, the optimal humidity is 40-60%, and the compressed air should be ≥0.5MPa.
3.Is there any work required for machine maintenance?
The machine is cleaned on the surface every day and only requires the addition of consumables. The lubrication of key components is checked weekly. An accuracy calibration is conducted once a month.
