Industrial Cleaning Equipment Manufacturing Expert
We excel in design. Not only do we offer mature standardized cleaning solutions, but we can also provide customized solutions that can be directly put into production for various industries.
We have our own sheet metal processing department. Precision machining can design and process components according to customers’ requirements immediately, significantly shortening the product delivery time.
Specializing in high-end cleaning equipment, providing water-based cleaning solutions
CNSMT is a professional manufacturer of cleaning equipment.
We have successively developed a series of cleaning equipment including: net plate cleaning machine, PCBA in-line cleaning machine, PCBA offline cleaning machine, brush cleaning machine, fixture cleaning machine, rotating spray cleaning machine, suction nozzle cleaning and detection integrated machine, module centrifugal cleaning machine, wafer cleaning machine, micro gap cleaning machine, dual solvent cleaning machine, gas phase cleaning machine, plasma cleaning machine, etc.
The application fields cover: SMT, PCB, CCM, semiconductor, optical glass, precision hardware, IGBT module and other industries’ products cleaning.
We also provide customers with a complete set of solutions including DI water treatment equipment and wastewater treatment systems, based on the Singapore TENICK water-based cleaning solution.
Suitable for steel mesh size 750(L)x750(W)x40mm(H)
Cleaning method 360° Rotary liquid spray cleaning and compressed air drying
Suitable for steel mesh, copper mesh, porous network and crystal and other types of disc screen cleaning. Also suitable for circuit board, fixture, scraper and other similar products and cleaning appliances.
Suitable for steel mesh size 750(L)x750(W)x40mm(H)
Cleaning method symmetric complementary spray cleaning spray-rinse-air drying-heating and drying
Suitable for steel mesh, copper mesh, porous network and crystal and other type of disc screen cleaning: also suitable for circuit board. fixture, scraper and other similar products and cleaning appliances.
Suitable for steel mesh size 750(L)x750(W)x40mm(H)*2PCS
Clean method Cleaning method symmetric complementary spray cleaning spray-rinse-air drying-heating and drying
Suitable for steel mesh, copper mesh, porous network and crystal and other. Types of disc screen cleaning; also suitable for circuit board, fixture, scraper and other similar products and cleaning appliances.
Clean roating backet size 1000mm*550mm(H)
Max cleaning size 1000mm(D)*520mm(H)
Cleaning heigh 400mm-520mm (high adjustable)
SMT, DIP fixture cleaning. scraper, condenser cleaning, al kinds of workpiece surface cleaning. al kinds of hardware parts after machining cleaning. equipment disassembly after parts cleaning, auto parts, al kinds of shell, box and other surface and hole wall residual pollution
Cleaning carousel blue size(length 600mm diameter 150mm)
Cleaning time 0~100m(adjustable)
Cleaning of SMT and DIP fixtures, cleaning of scrapers and condensers, cleaning of outer surfaces of various workplaces, cleaning of various hardware parts after machining. Cleaning of parts after disassembly of equipment, auto parts, various shells and boxes Contamination remaining on the surface and hole walls
Equipment Appearance Dimensions 1200*1300*1680mm
Cleaning area size 560*610*160mm (1 layer)
Automatic water cleaning machine is an energy saving, environmental protection, batch cleaning integrated high-end cleaning machine, can automatically complete the cleaning, air drying function; It is main used for cleaning the coated products of military industry, aviation, aerospace electronics, medical treatment, automobile new energy, automobile and other high-end precision products and the cleaning of multi-variety and small-batch PCB misprinted boards.
CNSMT specializes in providing cleaning systems
CNSMT is one of the teams with the most professional cleaning equipment in China.
Involving fields: Cleaning of products in industries such as SMT, PCB, CCM, semiconductors, optical glass, precision hardware, and IGBT modules. We provide Singapore-based TENICK water-based cleaning solutions and offer customers a complete set of solutions including DI water treatment equipment and wastewater treatment systems.
Mainly used for single-sided solder joints, coating products and high-end precision products of power boards in military industry, aviation, aerospace electronics, automotive new energy, and automotive electronics. It can also clean multi-variety and large-batch PCBAs. It can effectively remove organic and inorganic contaminants such as rosin flux, water-soluble flux, non-cleanable flux/solder paste, etc., remaining on the surface of DIP/THT PCBAs after welding.
It is mainly used for cleaning coating products and high-end precision products in industries such as military, aviation, aerospace electronics, medical, automotive new energy, and automotive electronics. It can also be used for cleaning multi-variety and large-batch PCB boards. It can effectively remove organic and inorganic contaminants such as rosin flux, water-soluble flux, and non-cleanable flux/solder paste remaining on the surface of SMT/THT PCBAs after soldering.
a. Primarily used for cleaning coating products in industries such as military, aviation, aerospace electronics, medical, automotive new energy, and automotive electronics, as well as for cleaning high-end precision products. It can effectively clean organic and inorganic contaminants such as rosin flux, water-soluble flux, and non-cleanable flux/solder paste remaining on the surface of SMT/THT PCBAs after soldering; b. Cleaning of solder paste on defective PCB boards and solder paste with scrapers, etc.
Automatic nozzle cleaner
We produce fully automatic nozzle cleaning machines. In addition, we also have fully automatic nozzle cleaning and inspection integrated machines.
According to your different needs, we also have an integrated machine that can store the suction nozzle cleaning and visual inspection functions.
By breaking down water into extremely fine water mist, a powerful kinetic energy is generated at the speed of sound (V = 360 ml/s) and sprayed onto the suction nozzle. A continuous energy field is formed above the suction nozzle to be cleaned, disintegrating the dirt on the surface and inside. It is an independent cleaning process without damaging the suction nozzle.
Process flow: Manual insertion of suction cup disk – XYZ three-axis – Ultrasonic cleaning – Frontal rinsing – Rear rinsing – Drying – Manual removal of suction cup disk – Automatic insertion into inspection machine – XYZ three-axis inspection – Manual removal of suction cup disk
It is mainly used for cleaning the suction tips of the soldering machines in the SMT workshop (such as Panasonic, Fuji, Siemens, Yamaha, Samsung, etc.). The entire process, including heating and cleaning, spraying, air drying, scanning and inspection, and classification, is completed.
The waste liquid uses the internationally mainstream method of low-temperature and reduced-pressure distillation. The waste liquid evaporates and boils at 30 degrees in a vacuum environment of -97 kPa, avoiding the occurrence of chemical co-boiling under high-temperature conditions, ensuring the compliance and stability of the reclaimed water quality. The industrial wastewater is treated and separated into 10% concentrated waste liquid and 90% qualified reclaimed water.
The water quality of the equipment’s output is ≥ 2MQ, and the wastewater after rinsing can be treated and recycled for reuse. The main process is: original water pump + sand filter + carbon filter + polishing mixed bed resin. The maximum designed inlet water volume of the scheme is less than 200L/h. The inlet water is the rinsing water source of the PCBA equipment: the turbidity is ≤ 5NTU, and the pH value is 6 to 9. The operation mode of the equipment: it runs automatically 24 hours a day.
It has a continuous 24-hour water supply function and an effluent salt removal rate of over 97%.
The machine starts up with rapid low-pressure flushing to remove the residual water in the reverse osmosis; it operates automatically and has a shutdown protection function in case of insufficient water supply. The system has an automatic power-off protection function for low pressure; the RO system has an automatic water replenishment device; the system has complete automatic flushing functions, including rapid low-pressure flushing upon startup.
Used for PCB cleaning, dust removal, static electricity elimination, internal use of sticky dust paper separation; dual cleaning with brush and sticky dust roller; strong ability to remove dirt; static electricity elimination device, with net charge value below 100V; stable and smooth conveying device preventing wrinkles and rolling; function to set the replacement cycle of sticky dust rolls; counting function and numerical control speed display function; stable and balanced width adjustment device; small floor space.
It can conduct ion concentration tests on the surfaces of PCB, FPC, SMT boards, and electronic components;
Measurement range: Currently, 5.5 – 40 liters of 5 series products are available. Customized ion contamination measurement machines with adjustable measurement tank sizes can be provided; Temperature is PID-controlled and has a safe over-temperature protection design;
Filtering accuracy: 350 megaohms;
It is mainly used for cleaning coating products and high-end precision products in industries such as military, aviation, aerospace electronics, medical, automotive new energy, and automotive electronics. It can also clean multi-variety and small-batch PCB boards. It can effectively remove residual rosin flux, water-soluble flux, organic and inorganic contaminants such as non-cleanable flux/solder paste from the surface of SMT/THT PCBAs after soldering, as well as cleaning of defective PCB boards with solder paste and scraper solder paste.
CNSMT CLEAN SOLUTION
Why Choose CNSMT CLEANING SYSTEM?
We excel in design. Not only do we offer mature standardized cleaning solutions, but we can also provide customized solutions that can be directly put into production for various industries.
We have our own sheet metal processing department. Precision machining can design and process components according to customers’ requirements immediately, significantly shortening the product delivery time.
Related Product
How to choose suitable cleaning system?
Based on your production volume
• Daily production capacity ≤ 2k pieces or single shift ≤ 300 pieces → Select “Offline Type”
• Daily production capacity 2k – 10k pieces → Select “Online Type” with belt speed 0.3 – 0.6 m/min (PBT-600/500/360)
• Daily production capacity ≥ 10k pieces → Select “Online Type” with belt speed ≥ 0.8 m/min (PBT-680, width 600mm, length unlimited)
Based on the type of contaminants to be removed
• Rosin/water-soluble flux → Any water-based model can handle it
• Anti-wash low-solid flux → It is best to have a heating + high-pressure spray (≥ 3kg/cm²) or an “brush” section
• Three-proof paint, thick coating, fixture glue → Choose “solvent-based” or “vacuum plasma”
• Solder paste misprint → Choose a dedicated “misprint board cleaning machine” PBT-800G (fully pneumatic, 60L tank, no risk of electric spark)
According to the board size
Compare the “length × width × thickness” and “single basket weight” of the largest board directly with the sample parameters:
• Within 350mm width and thickness 0.1 – 4mm → Brushing machine PBT-350/350MS
• Within 600mm width and thickness ≤ 100mm → Online spray PBT-600/680
• Extra-large board 750×750mm → Offline spray PBT-1000X/XS (double slot version)
Site & Budget
• No drainage pipes → Select “Zero Discharge” model PBT-1000LXS (comes with distillation recovery and 90% water reuse)
• Explosion-proof requirements → Select “Fully Pneumatic” model PBT-750/800G (completely without electricity)
• Dust-free workshop → Select 304 stainless steel + FFU model (PBT-650 wafer grade, with mirror finish on the shell)
PCBA cleaning machines are classified into five categories: “water-based spray”, “solvent spray”, “brush”, “ultrasonic + spray”, and “vacuum plasma”.
Choose according to your specific needs.
Our professional after-sales service team will quickly resolve any emergencies you may encounter during use.
The whole machine maintains for a year, one year after the warranty to provide free technical support.
Standard equipment is in stock, while less commonly used models require 10-15 days depending on the situation.
We offer remote technical guidance. On-site installation and commissioning will add additional costs, including accommodation and airfare.
Typically, shipping is by sea or land. Air freight is more expensive for urgent needs.