2AGKNG009700 Universal Nozzle 0.8mm for NXT H08 / H12 Heads
Part No.: 2AGKNG009700 (General model code); some manufacturers mark it as customized AA series code, confirmation based on specific nozzle specification is required.
Item Name: Universal Nozzle 0.8mm for NXT H08 / H12 Heads
Brand: Fuji
Applicable Models: H08 and H12 placement heads of Fuji NXT, NXT II, NXT III series mounters (the nozzle interfaces of the two heads are interchangeable).
Function: It adopts vacuum suction to accurately grab 0.8mm SMT components, including resistors, capacitors in 0402/0603 packages and small-size ICs for high-precision mounting. The nozzle tip is mostly made of ceramic material to prevent static electricity, resist abrasion and avoid component adhesion.
- 2AGKNG009700 Universal Nozzle 0.8mm for NXT H08 / H12 Heads
2AGKNG009700 is a universal 0.8mm placement nozzle for Fuji NXT H08 and H12 heads. Some manufacturers mark it as customized AA series codes, so specifications must be verified before purchase. Compatible with Fuji NXT I, NXT II and NXT III mounters, it can be directly interchanged since the two placement heads share identical interfaces.
The nozzle tip is made of ceramic, which is anti-static, wear-resistant and anti-adhesive. It is specially used to pick 0402 and 0603 resistors, capacitors and small ICs with stable vacuum suction and excellent placement precision. Both original and compatible versions are available on the market, serving as regular consumables for high-speed SMT mounting.
Abrasion after long-term use will lead to component dropping; regular replacement helps stabilize production yield, making it an indispensable spare part for electronics factories mass-producing micro components.
Our company keeps sufficient stock with short lead times. This nozzle fits 0402/0603 RC components and tiny ICs to achieve high-precision mounting. Its ceramic tip brings prominent advantages including static resistance, abrasion resistance and low component adhesion.
For inquiries, please contact us at +8613537875415 or Lizzy@smtlinemachine.com.
Visit us at Xintian Industrial Area, Baoan, Shenzhen City, China.liang
FAQ
Q1: Which equipment is the 2AGKNG009700 nozzle compatible with?
Compatible with Fuji NXT mounter H08 and H12 placement heads, universal 0.8mm placement nozzle.
Q2: What is the core function of this 0.8mm universal nozzle?
Precision micro-hole structure with uniform and stable vacuum, accurately pick micro SMD components like 0201 to reduce dropping during high-speed production.
Q3: Can it directly replace the original nozzle of the same model from the manufacturer?
Fully consistent with original nozzle in outline clip, vacuum channel and mounting size, ready for production without calibration after replacement.
Q4: What production line problems will be caused by clogged or worn nozzles?
Unbalanced suction causes missing pickup, component offset and frequent dropping; clogged micro holes trigger machine vacuum alarm and production line stop.
Q5: How to perform daily maintenance to extend the service life of the nozzle?
Clean dust and tin residue inside micro holes every shift, regularly check tip wear and deformation, unclog blockages with special cleaning fluid.