AA20A00 NXT H04 1.3 Placement Nozzle
Part No.: AA20A00
Item Name: NXT H04 1.3 Placement Nozzle
Brand: Fuji
Applicable Models: Fuji NXT series mounters. Compatible with H04 and H04S placement heads. Nozzles of the same size for H08/H12 heads are not interchangeable; interface confirmation is required before use.
Function: Adopt vacuum negative pressure to pick and precisely mount chip components with around 1.3mm diameter (including 0603, 0805 resistors, capacitors and small ICs). It is a core consumable for high-speed and high-precision mounting on SMT production lines.
- AA20A00 NXT H04 1.3 Placement Nozzle
The Fuji AA20A00 nozzle is a dedicated 1.3mm placement nozzle compatible with NXT H04 and H04S placement heads, a core consumable for SMT production lines. This Φ1.3 nozzle is mainly used for picking and mounting 0603, 0805 resistors, capacitors and small ICs, delivering high-precision operation with stable vacuum pressure.
Both original and compatible versions are available on the market. Please note that nozzles of the same size for H08 and H12 heads feature incompatible interfaces, so equipment model verification is necessary before purchase. Designed for high-speed Fuji NXT mounters, it is wear-resistant and durable, greatly reducing component dropping failures and cutting production line maintenance costs.
This vacuum placement nozzle guarantees consistent mounting accuracy for mass production or frequent product changeovers, making it a commonly used accessory for electronics factories to optimize placement procedures and stabilize production yield. Our company maintains sufficient stock with fast lead times.
Compatible with H04 and H04S heads, it uses vacuum negative pressure to pick and precisely mount chip components of around 1.3mm diameter, acting as an essential consumable for high-speed, high-precision mounting in SMT workshops.
For inquiries, please contact us at +8613537875415 or Lizzy@smtlinemachine.com.
Visit us at Xintian Industrial Area, Baoan, Shenzhen City, China.liang
FAQ
Q1: Which equipment is the AA20A00 placement nozzle compatible with?
Compatible with Fuji NXT series H04 placement head for production of 1.3-spec SMD components.
Q2: What is the core function of this 1.3 nozzle?
Balanced and stable vacuum output, grasps standard SMD components such as 0805 and 1206, effectively reducing component loss rate during high-speed placement.
Q3: Can it directly replace the original nozzle of the same model from the manufacturer?
Fully interchangeable with original nozzle in mounting position, vacuum channel and overall size, ready for production without calibration after replacement.
Q4: What production line issues will be caused by clogged or worn nozzles?
Insufficient vacuum suction leads to missed pickup, component offset and frequent dropping parts; clogged tiny holes trigger machine vacuum alarm and production halt.
Q5: How to perform daily maintenance to extend the service life of the nozzle?
Clean tin powder and dust on nozzle tip every shift, regularly check wear and deformation of nozzle tip, clear blockages with special cleaning liquid.