Presenting the details of XD-400CB DIP Outfeed Conveyor

• Pain point: Unstable discharging speed of wave soldering easily causes board stacking, scratches solder joints and leads to high PCB scrap rate.
  Reason for selection: Constant-speed buffering conveying structure with auto stop function upon board jam prevents extrusion scratches and greatly cuts material waste.
• Pain point: Ordinary docking conveyors cannot withstand high temperature; belts age rapidly and need frequent replacement, raising maintenance costs.
  Reason for selection: High-temperature resistant conveyor belt delivers long service life, lowers replacement frequency and saves consumable expenses.
• Pain point: Hot PCBs carry static electricity which breaks solder joints, resulting in hidden defects and rework troubles.
  Reason for selection: Full anti-static design dissipates static charge on boards to prevent cold solder joints and electrostatic damage, improving production yield.
• Pain point: Traditional docking equipment has poor compatibility, requiring disassembly and modification during line renovation, wasting time and labor.
  Reason for selection: Universal docking structure fits all brands of wave soldering machines, plug-and-play installation without modifying original production equipment.
• Pain point: Limited factory space, bulky traditional outfeed conveyors occupy too much area.
  Reason for selection: Compact frame occupies less space, perfectly suitable for compact DIP plug-in workshops.

Unique Selling Points of XD-350YZ PCB parallel transfer equipment

• Intelligent Anti-jam Start-Stop System: Equipped with accumulation photoelectric sensor, it stops automatically during board jamming and restarts after blockage removal, avoiding PCB extrusion scratches and cutting scrap costs effectively.
• High-temperature Resistant & Wear-resistant Conveying Parts: Heat-resistant special belts adapt to hot PCB output of wave soldering, featuring slow aging and long replacement cycle to save consumable maintenance cost.
• Full-range Anti-static Protection System: Integrated grounding anti-static structure eliminates static on hot PCBs, preventing solder joint damage caused by static electricity and raising DIP finished product yield.
• Universal Connection Design for All Brands: Compatible with all wave solder models without modifying original machines, easy to integrate into existing through-hole lines and shorten line renovation time.
• Compact & Lightweight Structure: Small footprint fits narrow DIP workshops with flexible installation, simple daily maintenance and lower long-term operating expenses.

• Ambient temperature: 0℃～45℃, keep away from high-temperature heat sources and direct solder fume blowing.
• Power supply: single-phase 220V AC power with reliable grounding to guarantee anti-static performance.
• Installation: place horizontally, align height with wave soldering outlet for smooth PCB feeding.
• Working condition: The XD-400CB PCB Outfeed Conveyor is suitable for PCBs discharged from wave soldering with temperature ≤ 180°C. Do not allow overheated circuit boards to bake the conveyor belt for a long time.
• Humidity: 40%～70% RH; humidify properly in dry environments for static prevention.
• Space requirement: reserve maintenance space on both sides and storage area for PCBs at the rear.
• No air supply needed, fully electric driving.

What It Is Used For

• Receive hot PCBs from wave soldering equipment, deliver boards steadily to downstream stations and connect the entire DIP assembly line.
• Buffer the production tact of front and rear processes to prevent PCB stacking and blockage, avoiding solder joint scratches caused by extrusion.
• Dissipate static electricity on circuit boards to prevent electrostatic damage to solder joints and improve finished product yield.
• Transfer high-temperature PCBs for natural cooling, facilitating manual inspection and AOI detection afterward.
• Build a standardized conveying channel to regularize PCB posture and reduce skew and jamming failures.

 

Conclusion

The XD-400CB anti-static unloading machine serves as the core docking equipment supporting DIP through-hole production lines. Boasting four core characteristics including high-temperature resistant conveyor belts, intelligent jam-triggered automatic shutdown, full anti-static protection and universal compatibility with all machine models, it addresses industry pain points such as scratched solder joints from accumulated PCBs exiting wave soldering equipment, frequent belt wear, hidden defects caused by static electricity, and compatibility difficulties during the renovation of legacy production lines.

Compact and space-saving, the XD-400CB anti-static unloading machine can be flexibly integrated into both new and existing through-hole production lines. It buffers production tact time and naturally cools high-temperature PCBs while reliably protecting solder joints from electrostatic damage, lowering scrap rates and operational maintenance costs during long-term operation.

Application Cases: This model has been deployed in batches at mobile power supply DIP workshops in India, home appliance through-hole factories across Southeast Asia, and consumer electronics assembly lines in Mexico. After commissioning, PCB scrap rates dropped by 17% at the Indian factory; the service life of conveyor belts was tripled at the Southeast Asian home appliance plant; the Mexican production line accomplished production line upgrades without modifying its original wave soldering machines.

These three overseas production lines have operated steadily for over three consecutive years with drastically reduced rework and consumable expenses, making the equipment a versatile and cost-effective docking solution for DIP production line upgrades globally.

 

• Yes. Its universal docking design connects all mainstream wave solder brands without modifying original equipment.

Is XD-400CB suitable for narrow DIP plug-in workshops?

• Absolutely. Compact frame occupies minimal floor space for flexible layout in tight workshops.

Warranty period?

• -The entire machine is covered by a one-year warranty, with free technical support provided after that year.

Do you provide installation and commissioning?

• On-site installation and commissioning will incur additional fees, including accommodation and airfare.

Shipping method?

• Typically, shipping is by sea or land. Air freight is more expensive for urgent needs.

Packaging and Delivery Information:

Delivery: Standard equipment is in stock, while less commonly used models require 10-15 days depending on the situation..

Minimum Order: We accept orders for a single machine or mixed orders to suit your needs.

Transportation: Products are shipped either in bulk or via containers, depending on the order size and destination.

Payment Terms: Flexible payment options are available, including L/C, D/A, D/P, T/T, Western Union, and MoneyGram.

Price: Prices are negotiable to ensure you receive the best possible value.

Packaging: We offer both standard export boxes and robust hardwood packages to ensure your order arrives safely and securely.

If you have any other questions, please contact us to obtain more information