XJP8-35T Servo Hydraulic Punching Depaneling Machine
XJP8-35T Servo Hydraulic Punching Depaneling Machine with servo hydraulic control system, the punching pressure can be precisely adjusted. It adopts customized molds for punching depaneling with uniform and stable stress, suitable for mass punching separation of various precision circuit boards.
- Punch and separate all kinds of PCB and FPC.
- Stress-free cutting for thick and multi-layer circuit boards.
- Cut PCB tabs to protect delicate circuits and components.
- Suitable for mass production of new energy, automotive and industrial control PCBs.
- XJP8-35T Servo Hydraulic Punching Depaneling Machine Specifications
- Key Features
- Advantages
| Parameter | Details |
| Cutting Range | 1200mm*500mm |
| Stamping method | Servo hydraulic type |
| Equipment output | 35 tons of output |
| Scope ofapplication | Suitable for FPC splitting, stamp-hole PCB splitting, and aluminum substrate/coppersubstrate cutting |
| Minimum distance between partsand cutting position | ≥0.5mm |
| Partition efficiency | 15s/PCS whole panel |
| Dperational protection | Safety light curtain,safety door,two-handed operation start button |
| FPC cutting position | Components are not allowed to straddle the cutting point |
| Positioning hole requirements | more than four positioning holes, an additional foolproof hole shall be provided |
| Maximum height of components onFPC board | The maximum height of components on the reverse side of the PCB is 20mm, and the maximum height of components on the front side is 35mm |
| Mould type | Die or Compound Precision Steel Mold |
| Service life of the Mold | 300,000 cycles (The service life of a new mold is 300,000 cycles. Mold repair is allowed,except for damage caused by human factors |
| Preparing mold documentation | Two or more samples with components, plus the product’s Gerber or CAD files |
| Operation mode | Products are manually loaded and unloaded, while the machine performs automati ccutting |
| Operating System | Weinview Touch Screen, with Chinese and English interfaces |
| Power and Air Cut-off Function | Have |
| Operating mode | Automatic Push-Pull In-and-Out Cutting for Lower Mold |
| Self-inspection Function | Start-up Time Monitoring, Production Capacity Monitoring, Equipment Fault Alert, andAutomatic Troubleshooting Function |
| Power supply | AC 380V 50HZ |
| (L*W*H) | 1540*1570*1830 mm |
| Weight | 2600kg |
- Adopts servo hydraulic punching and cutting, featuring fast speed with a cutting rate of 15 seconds per whole board.
- The punching and cutting pressure is 35 tons, equipped with a hydraulic oil temperature measurement and alarm function.
- Cutting worktable size (L *W) 1200 * 500mm.
- Composed of a sliding platform, servo motor, servo driver, sensor, etc., the forward and backward sliding of the platform is completed through the control system.
- The maximum thickness of the steel mold is T=100mm, which allows normal cutting operation.
- Drawer-type cutting workbench (the cutting table automatically returns to the operating position after cutting is completed), adopting a servo motor that enables high speed and high precision.
- The touch screen displays the equipment’s production quantity, which can be set arbitrarily: the number of boards produced by the XJP8-35T Servo Punch Type Depanel Equipment can be set manually by the user;(1) The XJP8-35T Servo Punch Type Depanel Equipment pressure can be set on the touch screen; when entering the pressure adjustment interface, parameter adjustment is only allowed after unlocking with a non-operator password, and the operating area is equipped with safety protection devices.
- 35T high servo hydraulic force for extra-thick multi-layer PCBs.
- Low punching stress to prevent damage to precision components.
- Servo precise pressure control for uniform burr-free cutting.
- Rigid XJP8-35T Servo Punch Type Depanel Equipment frame, stable operation with low noise.
- Dual-hand safety operation for high production safety.
- Easy mold replacement for mass production of various products.
Why choose this product?
- 35T super-large servo hydraulic punching force, suitable for processing thick boards, multi-layer PCBs and FPCs.
- Precise servo pressure control with low punching stress to protect components and improve yield.
- Rigid XJP8-35T 35T Servo Hydraulic PCB Punch Separator structure, stable and low-noise operation for long-term mass production.
- Customizable parameters; quick product switching by replacing molds.
- Dual-hand simultaneous start safety device to avoid operator injuries.
- Durable and energy-saving hydraulic system with easy maintenance to cut overall production costs.
How It Works
- The servo motor drives the hydraulic system to output 35 tons of punching power.
- The control system precisely controls the cylinder’s downward stroke, punching pressure and speed.
- Matched upper and lower molds align and clamp to vertically cut PCB connecting tabs.
- Buffer structure weakens punching impact and greatly reduces depaneling stress.
- The cylinder automatically resets after punching to realize damage-free substrate separation.
Application Process
- Install and lock dedicated punching molds matched with products.
- Switch on power, start the XJP8-35T PCB Punch Cutting Machine and set punching pressure and stroke parameters.
- Put PCBs into positioning fixtures and fix accurately.
- Press dual safety buttons simultaneously; the cylinder descends to complete punching depaneling.
- The cylinder rises automatically after punching, then take out finished circuit boards.
- Clear waste materials and feed boards repeatedly for continuous mass production.
Requirements
- Place XJP8-35T PCB Punch Cutting Machine on flat, load-bearing, dry and ventilated workshop floor.
- Connect to stable 3-phase 380V industrial power supply; voltage stabilizer is recommended.
- Operating ambient temperature: 0℃~40℃, keep away from dust and corrosive gas.
- Matching dedicated molds are mandatory; over-thick boards and overload punching are forbidden.
- Operators shall receive pre-job training and wear protective gear during operation.
- Refill hydraulic oil and clean waste regularly, perform periodic maintenanc.
What It Is Used For
This XJP8-35T Precision Hydraulic Punch Circuit Board Separator adopts 35T servo hydraulic punching force to depanel PCB and FPC, cut circuit board connecting tabs and reduce depaneling stress to avoid cracks on components and circuits. It meets mass processing requirements of thick circuit boards for automotive electronics, new energy and industrial control.
Conclusion
The XJP8-35T Servo Hydraulic Punching Depaneling Machine is driven by servo hydraulic system with 35T powerful punching force, capable of damage-free depaneling of thick PCBs, multi-layer boards and FPCs. It generates low cutting stress to well protect delicate circuits and components, ideal for mass production of high-reliability circuit boards used in new energy, automotive electronics and industrial control industries. Built with rigid frame, the machine runs stably with low noise. Its servo system accurately regulates pressure and stroke to achieve smooth burr-free cutting. It supports fast product switching with customized molds and adopts dual-hand safety operation. Featuring low failure rate and simple maintenance, it is the preferred punching depaneling equipment for mass processing of thick precision PCBs.
Do you provide after-sales service?
- Our professional after-sales service team will quickly resolve any emergencies you may encounter during use.
Warranty period?
- -The entire machine is covered by a one-year warranty, with free technical support provided after that year.
Do you provide installation and commissioning?
- On-site installation and commissioning will incur additional fees, including accommodation and airfare.
Shipping method?
- Typically, shipping is by sea or land. Air freight is more expensive for urgent needs.
Packaging and Delivery Information:
Delivery: Standard equipment is in stock, while less commonly used models require 10-15 days depending on the situation..
Minimum Order: We accept orders for a single machine or mixed orders to suit your needs.
Transportation: Products are shipped either in bulk or via containers, depending on the order size and destination.
Payment Terms: Flexible payment options are available, including L/C, D/A, D/P, T/T, Western Union, and MoneyGram.
Price: Prices are negotiable to ensure you receive the best possible value.
Packaging: We offer both standard export boxes and robust hardwood packages to ensure your order arrives safely and securely.
If you have any other questions, please contact us to obtain more information
Send Your Inquiry